Panel connectors are used to join either Indoor P10 or Indoor P5 panels together at the vertical joint between each column. The center strip is used to join the panels on all inner joints, and a set of side strips to join the outside edges. These panel mounts are not compatible with outdoor style panels.
To calculate the number of strips needed, subtract one from the total amount of columns in the matrix, and add a set of side strips.
Example: A matrix with the dimensions of 5 panels wide and 6 panels tall would require 4 center strips that are 6 tall, and 1 set of side strips that are 6 tall.
For help building out a panel, please visit our Matrix Buildout Configurator and Calculator. It will create a plug and play solution for building a panel to your specifications.
- Used for panel matrixes that are 1 panel tall
- Compatible with the center mounting strips that are 1 panel tall
- Compatible with Indoor P5 panels with a 144mm hole distance on the short side
- Compatible with Indoor P10 panels with an 89mm hole distance on the short side