Power TEE 3 Core Male Center Black Paul Zhang Connector
This option does not exist.
Tees are used to join three or more sets of lights or power / data sources. With a tee, you can accomplish a few different tasks without having to create a custom connector. Some common uses are power injection / power balancing, splitting a data signal, and back feeding data or power. Tees consist of a pair of mating connectors to allow passthrough along with a third connector to bring in or send out power and / or data. The third leg can be either a male or female depending on the specifications of the build. The tees on this page are wired straight through, meaning each corresponding conductor in each of the three connectors is joined in the middle. To accomplish some of the scenarios above, you may need to modify the connector by removing a pin to stop the flow of data, power, or both. Please refer to the Learn > Connectors page for a pinout of each connector.