Shop

New Customer
Wired Watts will be attending The Christmas Expo 2019 in Daytona, FL. Be sure to visit us in booths 8 and 9. As such, all orders placed on or after July 15th will be shipped starting the week of July 21st.
  info@wiredwatts.com   +1(860) Got-Watts

Kulp Lights F32-B

Kulp Lights F32-B

$95.00

Kulp Lights F32-B

Availability: In stock
Model: ctrlf32b
Condition:New
Categories: Controllers

Qty:
Share:

Description

The F32-B is a cape for the BeagleBone Black designed to drive WS2811 LED pixels. It has 32 local ports (fused with LED indicators) that can each drive over 700 pixels (with power injection) at 40FPS. It also has four RJ45 differential ports that can output an additional sixteen strings or eight universes of DMX. This version also provides a Real Time Clock, temperature sensors, an OLED display, and two push buttons for navigating menus on the display.

The F32-B was designed to drive a large number of pixels for dense props like MegaTree’s and matrices where having a lot of local ports is useful.

The 32 local ports provides more outputs than most controllers providing the ability to run a lot of pixels for dense props.

The 4 RJ45 ports provide additional output capabilities to allow for future expansions. Two of the ports can be configured to either drive a WS2811 pixel differential receiver board or can be configured to output four universes of DMX for each port. The other two RJ45 ports can only drive WS2811 pixels via a receiver board.

The BeagleBone can be powered by the same power supply powering the pixels. There are jumpers on the board to select either 5V or 12V power. Alternatively, the BeagleBone can be powered by it’s own barrel connector if an on-board jumper is removed.

Other Products You May Be Interested In